Your Cart is Empty

SK2X8V | Dual 8" Ported Subwoofer Enclosure

  • Skar Audio introduces its SK series line-up of high-performance subwoofer enclosures to bridge the gap between competition-grade quality and universal fit pre-fabricated enclosures. The SK2X8V subwoofer enclosure is a dual 8-inch, universal fit, ported, subwoofer enclosure that is designed for maximum bass and responsiveness. Finished in a premium black carpet and featuring the Skar Audio logo on the lower left side, this enclosure will look sleek and attractive in any application.

    Quick Facts
    Internal Air Space (Volume) 2.00 ft3
    Tuning Frequency 39 Hz
    Cut-Out Diameter 7.25"
    Mounting Depth 11.50"

    When setting out to offer a line-up of premium, universal fit, subwoofer boxes, the end goal was to deliver a final product that was unlike anything else available on the market; setting new standards for quality and performance. The enclosure features a kerf style port, which means that the port construction utilizes the curves typically found only in custom, high-end, professional enclosures, allowing the box to offer deeper and more accurate bass. Furthermore, it’s precisely tuned to ensure that it delivers riveting low-end frequency response and the type of bass that turns heads from outside the vehicle.

    The differentiating features that put this box in a league of its own don't stop there though; this dual 8-inch vented enclosure also utilizes high-end materials during construction, ensuring durability and reliability. On top of its outstanding craftsmanship, this enclosure is also braced for extreme strength, and can handle even the most brutally powerful subwoofers. Internally, we line several walls of the enclosure with poly-fill to enhance the overall versatility and depth of sound that this enclosure reproduces with any given subwoofer. The premium push terminal wiring cups that are built into each side of the enclosure, feature 16-gauge speaker wire that is pre-soldered and connected to the terminals, making it easier than ever to wire up and install your subwoofers.

  • General Specifications
    Subwoofer Size 8"
    Enclosure Type Vented (Ported)
    Port Type Kerf Style (Maximum Bass)
    Fit Type Universal Design
    Number of Subwoofer Chambers
    Total Gross Box Volume 2.00 ft3
    Tuning Frequency of Enclosure 39 Hz
    Wood Type 5/8" MDF
    Enclosure Finish Premium Black Carpet
    Push Terminal Opening Size 8 Gauge
    Subwoofer Mounting Paramters
    Subwoofer Hole Cut-out Diameter 7.25"
    Subwoofer Maximum Depth 11.50"
    Enclosure External Dimensions
    Height 12.00"
    Depth 1 (Bottom) Front to Back 16.00"
    Depth 2 (Top) Front to Back 14.00"
  • Subwoofer Model
    IX-8 D2/D4
    VD-8 D2/D4
    SDR-8 D2/D4
    VVX-8v3 D2/D4
    MA-8 D2/D4
    SVR-8 D2/D4
    ZVX-8 D2/D4

Customer Reviews

Based on 10 reviews
Subwoofer box

I got the 8" subs and the Box but the subs do not fit and the wires inside the Box are not long enough to connect to subs. Now I have to wait other week or two for a new box

Quick ,great , sound

Great sound , easy to work with . My entire experience with skar Audio had been outstanding. This box 2 ma 8s on a lp1000. Simply Amazing ,clean accurate bass with all types of music , hits as hard as anyone needs !!!

Good box.

So ive had a set of zvx8d2s for awhile now. Finally pulled the trigger and bought this box. The holes were a bit small for the vd8 or zvx platforms. With a bit of sanding they fit nice and tight. The only real complaint i have that makes this 4 stars is the terminal cups. They are held in with little screws. And the included wires are small. Think thats due to being designed for a more entry sub. Put beefier screws and bigger wire and sounds great. Thicker wire so no rattle.


Everything about this Box is classy. You only problem is on the 8" sub boxes the hole is just a little too small

Damn fine prefab

Don't usually go prefab route, needed this temporary to fit my car while getting one built.

I beefed it up a bit, with t-nuts for sub mounting, used Dayton audio heavy duty binding posts with banana plugs attached to 8g ofc for wire.

The box has some pretty beefy internal bracing you can't see from photos cuzz of the poly fill. But it has quite a bit of bracing.

Box sounded and looked so good, I didn't even have one built. This is a keeper

THEY NEED TO MAKE THIS IN A 4 X 8" SUB VERSION. no longer than 42" wide. Cuzz I have 4 8s now and am needing a box built for the 4. Can't fit 2 side my side

Sign up for our Newsletter