Single 10" 1,400 Watt VVXv3 Series Complete Subwoofer Package with Vented Enclosure and Amplifier

  • skar-audio-vvxv3-complete-bass-package-1200-watts-main

Single 10" 1,400 Watt VVXv3 Series Complete Subwoofer Package with Vented Enclosure and Amplifier


* Financing through our Partner, Bread

Description

Description

Skar Audio created this premium complete bass package to make it easier than ever to add low-frequency, head-turning bass to your vehicle. This package features one, 10-inch Dual 2 ohm Skar Audio VVXv3 Series Subwoofer, which is pre-loaded and already wired up inside a premium single 10" side vent carpeted SPL enclosure. We also include the perfect amplifier in this package to power your new subwoofer with the Skar Audio RP-800.1D, which comes with a Stinger Select 4 gauge amplifier wiring kit. Get loud today with this complete bass package from Skar Audio.

 

This package was put together by our installation experts to ensure compatibility and allow for an easy installation. We take the guess work out of pairing the components of your system up, and make it easy to get the bass you've always wanted in your ride.

 

The dual 2-ohm subwoofer included in this package are pre-configured and wired up inside of the subwoofer enclosure at a 1-ohm final load to ensure an easy and hassle free installation.

 

 

Subwoofer Specifications

  • Skar Audio VVX-10v3 D2 - 10" Competition Grade Subwoofer
  • Dual 2 Ohm Voice Coil Configuration
  • Peak Power: 1,400 Watts
  • RMS Power: 700 Watts
  • Competition Grade Pressed Paper Cone
  • High Roll Foam Surround
  • 2.5" High Temperature Copper Voice Coil
  • Frequency Response: 40 - 450 Hz
  • Sensitivity: 85.2 dB
  • Fs: 33.7 Hz
  • Re: 3.8 Ohms
  • Qms: 6.60
  • Qes: 0.44
  • Qts: 0.41
  • Mms: 214.0 gr
  • Rms: 7.2 kg/s
  • Cms: 0.10 mm/N
  • Bl: 22.7 n/a
  • Vas: 17.4 L
  • Xmax: 15.5 mm

Amplifier Specifications

  • Skar Audio RP-800.1D Class D Monoblock Car Subwoofer Amplifier
  • 4 Way Protection Circuitry: Thermal, Voltage, Speaker, DC
  • RMS Power at 2 Ohm: 600 Watts x 1 Channel (14.4v)
  • RMS Power at 4 Ohms: 370 Watts x 1 Channel (14.4v)
  • RMS Power at 1 Ohms: 810 Watts x 1 Channel (14.4v)
  • Max Power at 1 Ohms: 1,200 Watts x 1 Channel (14.4v)
  • MOSFET Power Supply
  • Soft Turn on Circuit
  • Tri-Mode Capable / Bridgeable
  • Frequency Response: 20Hz~250Hz
  • Signal to Noise Ratio: 85dB
  • Damping Factor: 200<
  • Low Pass Filter (Variable): 50Hz~220hz
  • Subsonic Filter: Off~50Hz
  • Remote Bass Knob & Wire Included
  • 4 Gauge Power and Ground Terminals
  • Working Voltage: 8.5V-14.4V
  • Fuse Rating: 80Amp
  • Dimensions: 16" (Length) x 7" (Width) x 3" (Height)

Amp Kit Specifications

  • Stinger Select Model No: SS1200XS
  • 4 Gauge 1200 Watt Amplifier Wiring Kit
  • Great for Use with Installing System's up to 1200 Watts
  • 17 Feet of 4 Gauge Matte Blue Power Wire
  • 3 Feet of 4 Gauge Matte Silver Ground wire
  • 17 Foot Matte Blue Twisted Pair 2 Channel RCA Interconnects Included
  • 17 Feet of Blue Remote Turn-on Wire
  • 20 Feet of Translucent Speaker Wire
  • 5 Feet of Black Flex Loom Tubing
  • Includes High Current ANL Fuse Holder with 150 amp mini ANL Fuse
  • 10 4 inch cable ties
  • 2 Butt Connects (red)
  • 1 Plastic Grommet
  • 2 Silver plated 4 gauge ring terminal (red)
  • 2 Silver plated 4 gauge ring terminal (black)
  • 1 Silver plated 4 gauge spade terminal (black)
  • 1 Silver plated 4 gauge spade terminal (red)

Enclosure Specifications

  • Single 10" Ported Subwoofer Enclosure
  • High Quality 3/4" MDF Construction
  • Premium Grade Charcoal Carpet Finish
  • Air Space: 1.25 Cubic FT³ (Gross Volume)
  • Tuned Frequency: 41 Hz
  • High Quality Ring Terminal Cup with Gold Plated Screw Terminals
  • Dimensions: 16" Deep x 16" Wide x 13.5" High
  • Subwoofer Hole Cut Out: 9.25"
  • Subwoofer Mounting Depth: 8.5"
  • Weight: 35 Pounds

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
J.J.
10 in woofer

Love it !!! Sounds great