SKv2-1500.1D | 1,500 Watt Monoblock Car Amplifier

  • Skar Audio SKv2-1500.1D 1,500 Watt Class D Monoblock Car Amplifier - Front View

SKv2-1500.1D | 1,500 Watt Monoblock Car Amplifier



The Skar Audio SKv2 amplifiers represent the pinnacle of amplifier innovation and engineering. Designed for the most serious audiophiles, the SKv2 product lineup is built for competition and will provide extremely high levels of power output. These amplifiers utilize a heavy duty aluminum heat sink, which when combined with the advanced internal circuitry design, allow them to operate cooler for maximum efficiency. In addition to being 1 ohm stable, the SKv2 series are conservatively rated, and will outperform others in their class with ease. Furthermore, these amplifiers all feature 4-Way protection circuitry, which allows the user to push them to their limits, but all while having the peace of mind that the amplifier will protect itself to ensure for long term reliability and use.

The Skar Audio SKv2-1500.1D is the ultimate powerhouse monoblock subwoofer amplifier for use in applications where competition grade power and reliability is required. Stable at 1 ohm, and featuring high-speed MOSFET power supplies, this amplifier is capable of extreme levels of power output for extended periods of time. For maximum current flow and sustained power output, the SKv2-1500.1D utilizes over sized 1/0 gauge power and ground input terminals. The advanced heat sink design allows for maximum heat dissipation and the 4-way protection circuitry will keep this amplifier safe providing long term reliability.


*Skar Audio always recommends professional installation for all of our products.*


*High power amplifiers producing 1500 watts or more may require additional upgrades to your vehicles stock charging system.*


*Never mount amplifiers directly on the enclosure*



  • Class D Monoblock Subwoofer Competition Grade Car Amplifier
  • Extremely Powerful and Highly Efficient Design
  • Max Power @ 1 Ohm: 1,500 Watts x 1 Channels (14.4v)
  • RMS Power @ 1 Ohm: 1,500 Watts x 1 Channels (14.4v)
  • RMS Power @ 2 Ohms: 930 Watts x 1 Channels (14.4v)
  • RMS Power @ 4 Ohms: 500 Watts x 1 Channels (14.4v)
  • RMS Power @ 2 Ohms (Strapped): 3,600 Watts x 1 Channel (14.4v)
  • Frequency Response: 15Hz - 270Hz
  • Working Voltage: 8.5V-16V
  • Signal-to-Noise Ratio (Sensitivity): 95dB
  • Efficiency @ 4 Ohms: 86%
  • Damping Factor: 200<
  • Low Level Input (Gain): 6V - 0.2mV
  • RCA Line Output: Yes
  • Low Pass Filter @ 24 dB Slope: 35Hz - 250Hz
  • Bass Boost @ 45 Hz: 0 ~ 9 dB
  • Subsonic Filter @ 24 dB Slope: 10Hz - 50Hz
  • Phase Shift: 0-180 Degrees
  • 4-Way Protection Circuitry Built-in (Thermal, Voltage, Speaker, DC)
  • LED Power & Protection Indicators
  • Master / Slave (Strappable): Yes
  • Fuse Rating: 160 Amps
  • 1/0 Gauge Power and Ground Terminal Inputs
  • Remote Level Control Knob Included
  • Dimensions: 350mm x 232mm x 62mm (L x W x H)

Click Here to Download the SKv2 Amplifier Manual

Customer Reviews

Based on 14 reviews
Great amp

Puts out great power, makes my subs sound an flex great. I'll stick with SKAR audio.


Great product skar all day

Skv2 1500.1D

Skar asked for a review. I can’t say how the amp performs yet. I am putting my system together now. Current install consist of 2 DC audio level 3 15 2 DC audio level 3 18 . Mechman 340 alt. Factory 140 alt. Exide elite agm starting battery 2 xs 3400 and 6 viper 600 batteries from old system. 5 runs of ofc 0 gauge to the new amps which will consist of 4 skv2 1500’s strapped in pairs 2 sets of Skar component 6.5 with my old p400.4 amp and a new jvc head unit. My vehicle is still gutted for the wall build in the ol tundra. I am purchasing equipment as I get the cash so it may take a couple of more months to finish so hold on Skar more purchases coming. The components that I installed are incredibly clear and loud for the price. If I didn’t already have the subs it would be Skar all the way. I will post further updates as the install gets closer to finish.

Great value

I just installed it to power a pair of JL 10w6 v3’s and it is just what the doctor ordered. Solid at 1 ohm.


I bought this amp a couple weeks ago to go with my skar zvx v2 12 and I couldn't have been happier with this setup. I have the sub at 1 ohm and its up halfway and is VERY loud. If you are going to get a single zvx v2 12 this is the amp for you. #skarfanforlife