Single 15" 1200 Watt VVXv3 Series Complete Subwoofer Package with Vented Armor Coated Enclosure and Amplifier

  • Single 15

Single 15" 1200 Watt VVXv3 Series Complete Subwoofer Package with Vented Armor Coated Enclosure and Amplifier

Description

Description

Skar Audio puts together this loaded enclosure package to make it easier than ever to add serious bass to your vehicle. This package features one, 15-inch, dual 2-ohm, Skar Audio VVXv3 Series subwoofer, which is pre-loaded and wired up inside a premium Q Power single 15" Q Bomb armor coated side vent SPL enclosure. We also include the perfect amplifier in this package to power your new subwoofer with the Skar Audio RP-800.1D, which comes with a Stinger Select 4 gauge complete amplifier wiring kit. Get loud today with this complete bass package from Skar Audio.

This package was put together by our installation experts to ensure compatibility and allow for an easy installation. We take the guess work out of pairing the components of your system up, and make it easy to get the bass you've always wanted in your ride.

 

The dual 2-ohm subwoofer included in this package is pre-configured and wired up inside of the subwoofer enclosure at a 1-ohm final load to ensure an easy and hassle free installation.

 

Subwoofer Specifications

  • Skar Audio VVX-15v3 D2 - 15" Competition Grade Subwoofer
  • Dual 2 Ohm Voice Coil Configuration
  • Peak Power : 1200 Watts
  • RMS Power : 600 Watts
  • Competition Grade Pressed Paper Cone
  • High Roll Foam Surround
  • 2.5" High Temperature Copper Voice Coil
  • Frequency Response : 25 - 350 Hz
  • Sensitivity : 90.1 dB
  • Fs : 32.2 Hz
  • Re : 3.8 Ohms
  • Qms : 7.27
  • Qes : 0.55
  • Qts : 0.51
  • Mms : 299.0 gr
  • Rms : 10.6 kg/s
  • Cms : 0.11 mm/N
  • Bl : 22.7 n/a
  • Vas : 75.5 L
  • Xmax : 15.5 mm

Amplifier Specifications

  • Skar Audio RP-800.1D Class D Monoblock Car Subwoofer Amplifier
  • 4 Way Protection Circuitry : Thermal, Voltage, Speaker, DC
  • RMS Power @ 2 Ohm : 600 Watts x 1 Channel (14.4v)
  • RMS Power @ 4 Ohms : 370 Watts x 1 Channel (14.4v)
  • RMS Power @ 1 Ohms : 810 Watts x 1 Channel (14.4v)
  • Max Power @ 1 Ohms : 1,200 Watts x 1 Channel (14.4v)
  • MOSFET Power Supply
  • Soft Turn on Circuit
  • Tri-Mode Capable / Bridgeable
  • Frequency Response : 20Hz~250Hz
  • Signal to Noise Ratio : 85dB
  • Damping Factor : 200<
  • Low Pass Filter (Variable) : 50Hz~220hz
  • Subsonic Filter : Off~50Hz
  • Remote Bass Knob & Wire Included
  • 4 Gauge Power and Ground Terminals
  • Working Voltage : 8.5V-14.4V
  • Fuse Rating : 80Amp
  • Dimensions : 16" (Length) x 7" (Width) x 3" (Height)

Amp Kit Specifications

  • Stinger Model: SSK4ANL
  • 4 Gauge Complete Amplifier Installation Kit
  • For Systems Up to 1000 Watts
  • Premium power and ground wire provides optimal power transfer
  • Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
  • RCA Interconnects are made with twisted technology for noise reduction
  • ANL Fuse holder offers ideal protection for high powered systems
  • 17ft. Matte Blue Ultra Flexible Power Wire
  • 3ft. Matte Gray Ultra Flexible Ground Wire
  • 17ft. Twisted-pair RCA Interconnects
  • 17ft. Blue Remote Turn-on Wire
  • 20ft. Matte Blue Ultra Flexible Speaker Wire
  • 1 High Current ANL Fuse Holder with 100A Fuse
  • Ring Terminals
  • Ground Terminals
  • Vinyl Cable Ties

Enclosure Specifications

  • Q Power Model: QBOMB15VL SINGLE
  • Single 15" "Q Bomb" Armor Coated SPL Grade Vented Subwoofer Enclosure with Side Vent
  • Side Port Design and Armor Coating Design for Maximum Bass
  • Constructed using Premium 3/4" MDF
  • Finished in a ultra-strength armor coating
  • High Quality Gold Tipped Spring Loaded Terminals
  • Fits One 15-Inch Subwoofer
  • Internal Air Space: 3.85 Cubic Ft
  • Tuning Frequency of Enclosure: 37 hz
  • Mounting Depth: 10.5"
  • Mounting Diameter (Cut-out): 14.0"
  • Outer Box Dimensions: 33" Wide x 17.5" Depth x 17.25" Height