Triple 10" 1200 Watt IX Series Complete Subwoofer Package with Sealed Enclosure and Amplifier

  • Triple 10

Triple 10" 1200 Watt IX Series Complete Subwoofer Package with Sealed Enclosure and Amplifier

Description

Description

Skar Audio puts together this loaded enclosure package to make it easier than ever to add serious bass to your vehicle. This package features three, 10-inch, dual 2-ohm, Skar Audio IX Series subwoofers, which are pre-loaded and wired up inside a premium three hole 10" sealed enclosure. We also include the perfect amplifier in this package to power your new subwoofers with the Skar Audio RP-800.1D, which comes with a Stinger 4 gauge complete amplifier wiring kit. Get loud today with this complete bass package from Skar Audio.

This package was put together by our installation experts to ensure compatibility and allow for an easy installation. We take the guess work out of pairing the components of your system up, and make it easy to get the bass you've always wanted in your ride.

 

The dual 2-ohm subwoofers included in this package are pre-configured and wired up inside of the subwoofer enclosure at a 1.34-ohm final load to ensure an easy and hassle free installation.

 

Subwoofer Specifications

  • Skar Audio IX-10 D2 - 10" Component Car Subwoofer
  • Dual 2 Ohm Voice Coil Configuration
  • Peak Power : 400 Watts
  • RMS Power : 200 Watts
  • Pressed Paper Cone
  • Advanced Air Flow Cooling System
  • 2" BASV High Temperature Copper Voice Coil
  • Frequency Response : 40 - 600 Hz
  • Sensitivity : 86.3 dB
  • Fs : 35.7 Hz
  • Re : 4.1 Ohms
  • Qms : 6.41
  • Qes : 0.6
  • Qts : 0.55
  • Rms : 3.0 Kg/s
  • Cms : 0.23 mm/N
  • Bl : 11.4 n/a
  • Vas : 37.2 L
  • Xmax : 7 mm

Amplifier Specifications

  • Skar Audio RP-800.1D Class D Monoblock Car Subwoofer Amplifier
  • 4 Way Protection Circuitry : Thermal, Voltage, Speaker, DC
  • RMS Power @ 2 Ohm : 600 Watts x 1 Channel (14.4v)
  • RMS Power @ 4 Ohms : 370 Watts x 1 Channel (14.4v)
  • RMS Power @ 1 Ohms : 810 Watts x 1 Channel (14.4v)
  • Max Power @ 1 Ohms : 1,200 Watts x 1 Channel (14.4v)
  • MOSFET Power Supply
  • Soft Turn on Circuit
  • Tri-Mode Capable / Bridgeable
  • Frequency Response : 20Hz~250Hz
  • Signal to Noise Ratio : 85dB
  • Damping Factor : 200<
  • Low Pass Filter (Variable) : 50Hz~220hz
  • Subsonic Filter : Off~50Hz
  • Remote Bass Knob & Wire Included
  • 4 Gauge Power and Ground Terminals
  • Working Voltage : 8.5V-14.4V
  • Fuse Rating : 80Amp
  • Dimensions : 16" (Length) x 7" (Width) x 3" (Height)

Amp Kit Specifications

  • Stinger Model: SSK4ANL
  • 4 Gauge Complete Amplifier Installation Kit
  • For Systems Up to 1000 Watts
  • Premium power and ground wire provides optimal power transfer
  • Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
  • RCA Interconnects are made with twisted technology for noise reduction
  • ANL Fuse holder offers ideal protection for high powered systems
  • 17ft. Matte Blue Ultra Flexible Power Wire
  • 3ft. Matte Gray Ultra Flexible Ground Wire
  • 17ft. Twisted-pair RCA Interconnects
  • 17ft. Blue Remote Turn-on Wire
  • 20ft. Matte Blue Ultra Flexible Speaker Wire
  • 1 High Current ANL Fuse Holder with 100A Fuse
  • Ring Terminals
  • Ground Terminals
  • Vinyl Cable Ties

Enclosure Specifications

  • Q Power Model: BASS103HOLE | BASS10 3HOLE
  • Triple 10" Angled Subwoofer Enclosure
  • Fits Three 10" Subwoofers
  • Sealed Enclosure Design for Deep and Responsive Bass
  • Independent Subwoofer Chambers with Individual Wiring Terminal Cups
  • Rear Firing Sub Design
  • Built Using Premium 5/8" MDF
  • Mounting Depth: 20"
  • Mounting Hole Cut Out Diameter: 9.0"
  • Enclosure Dimensions: 32" Wide x 16" Deep x 14" High