Single 10" 400 Watt IX Series Complete Subwoofer Package with Vented Enclosure and Amplifier

  • Single 10

Single 10" 400 Watt IX Series Complete Subwoofer Package with Vented Enclosure and Amplifier

Description

Description

Skar Audio puts together this loaded enclosure package to make it easier than ever to add serious bass to your vehicle. This package features one, 10-inch, dual 2-ohm, Skar Audio IX Series subwoofer, which is pre-loaded and wired up inside a premium single 10-inch ported enclosure. We also include the perfect amplifier in this package to power your new subwoofer with the Skar Audio RP-350.1D, which comes with a Sound Quest 8 gauge amplifier wiring kit. Get loud today with this complete bass package from Skar Audio.

This package was put together by our installation experts to ensure compatibility and allow for an easy installation. We take the guess work out of pairing the components of your system up, and make it easy to get the bass you've always wanted in your ride.

The dual 2-ohm subwoofer included in this package is pre-configured and wired up inside of the subwoofer enclosure at a 1-ohm final load to ensure an easy and hassle free installation.

Subwoofer Specifications

  • Skar Audio IX-10 D2 - 10" Component Car Subwoofer
  • Dual 2 Ohm Voice Coil Configuration
  • Peak Power : 400 Watts
  • RMS Power : 200 Watts
  • Pressed Paper Cone
  • Advanced Air Flow Cooling System
  • 2" BASV High Temperature Copper Voice Coil
  • Frequency Response : 40 - 600 Hz
  • Sensitivity : 86.3 dB
  • Fs : 35.7 Hz
  • Re : 4.1 Ohms
  • Qms : 6.41
  • Qes : 0.6
  • Qts : 0.55
  • Rms : 3.0 Kg/s
  • Cms : 0.23 mm/N
  • Bl : 11.4 n/a
  • Vas : 37.2 L
  • Xmax : 7 mm

Amplifier Specifications

  • Skar Audio RP-350.1D Class D Monoblock Car Subwoofer Amplifier
  • 1 Ohm Stable and Capable of Safe Operating Load Daily
  • 4 Way Protection Circuitry: Thermal, Voltage, Speaker, DC
  • RMS Power at 1 Ohms: 350 Watts x 1 Channel (14.4v)
  • RMS Power at 2 Ohms: 250 Watts x 1 Channel (14.4v)
  • RMS Power at 4 Ohms: 150 Watts x 1 Channel (14.4v)
  • MOSFET Power Supply
  • Soft Turn on Circuit
  • Frequency Response: 20Hz~250Hz
  • Signal to Noise Ratio: 85dB
  • Damping Factor: 150<
  • Low Pass Filter (Variable): 50Hz~220hz
  • Subsonic Filter: Off~50Hz
  • Remote Bass Knob & Wire Included
  • 1/0 Gauge Power and Ground Terminals
  • Working Voltage: 8.5V-14.4V
  • Fuse Rating: 30 Amp
  • Dimensions: 6.23" (Length) x 6.3" (Width) x 2.2" (Height)

Amp Kit Specifications

  • Sound Quest Model: SQK8
  • 8 Gauge Complete Amplifier Installation Kit
  • 17 ft. of 8 AWG Matte Blue Ultra Flexible Power Cable
  • 3 ft. of 8 AWG Matte Gray Ultra Flexible Ground Cable
  • 17 ft. of Blue Remote Turn-on Wire
  • 17 ft. of Blue twisted pair shielded RCA cable (OFC)
  • 20 ft. of Matte Blue Ultra Flexible Speaker Wire
  • High Current Waterproof MIDI Fuse Holder
  • 60 Amp MIDI fuse
  • Ring Terminals
  • Ground Terminals
  • Vinyl Cable Ties

Enclosure Specifications

  • Q Power Model: SBASS10 VENTED
  • Single 10-Inch Ported Subwoofer Enclosure
  • Constructed and built using premium grade MDF Wood
  • Charcoal Carpet Covering
  • The 10" Q Power Subwoofer Box is designed and built for the deepest bass
  • Vented design of the enclosure allows for loud, deep, maximized bass response
  • Single Ported Chamber
  • Enclosure Dimensions: 16" Wide x 14.5" Deep x 12" High
  • Internal Volume: 1.1 cu ft