Skar Audio designed the SDR-1X12D2 loaded subwoofer enclosure package for those who seek ultimate performance in subwoofer-bass fidelity. This package offers a simplified option to add a competition-grade subwoofer system, without the guesswork involved in designing it from scratch. The custom enclosure features one, SDR-12 D2 subwoofer, which is pre-loaded and wired up inside of a custom single 12" vented enclosure. We also include the perfect amplifier in this package to power your new subwoofer with the Skar Audio RP-800.1D, which comes with a Stinger Select 4 gauge amplifier wiring kit to make installing the amplifier hassle free.
This custom enclosure used in this package was engineered by Skar Audio specifically for the subwoofer that is loaded in it, ensuring perfect sound and compatibility. Every subwoofer is different, and it is so critical when buying a subwoofer to ensure that the subwoofer and enclosure are an ideal match, or you will lose sound quality and output. The enclosure features a unique kerf port design, allowing for extreme levels of bass output. Furthermore, the enclosure is finished in premium grade black carpet for a sleek appearance and features the Skar Audio logo in white on the top surface of the box.
The subwoofer comes pre-wired and loaded inside of the enclosure allowing for an easy and hassle free installation. The dual 2-ohm subwoofer is wired up inside of the enclosure so that the final impedance load is configured for 1-ohm at the terminals. Peak Power: 1,200 Watts, RMS Power: 600 Watts.
- Skar Audio SDR-12 D2 - 12" Component Car Subwoofer
- Dual 2 Ohm Voice Coil Configuration
- Peak Power: 1200 Watts
- RMS Power: 600 Watts
- Competition Grade Pressed Paper Cone
- High Roll Foam Surround
- Advanced Air Flow Cooling System
- 2.5" High Temperature Copper Voice Coil
- Motor Weight: 97 oz
- Frequency Response: 32 - 300 Hz
- Sensitivity: 84.7 dB
- Fs: 32 Hz
- Re: 1.9 Ohms
- Qms: 6.76
- Qes: 0.58
- Qts: 0.53
- Nref: 0.185%
- Cms: 0.11 mm/N
- Bl: 16.67 n/a
- Vas: 36.2 L
- Xmax: 13.5 mm
- Skar Audio RP-800.1D Class D Monoblock Amplifier
- Class D Monoblock Subwoofer Amplifier
- 4 Way Protection Circuitry : Thermal, Voltage, Speaker, DC
- RMS Power @ 2 Ohm: 600 Watts x 1 Channel (14.4v)
- RMS Power @ 4 Ohms: 370 Watts x 1 Channel (14.4v)
- RMS Power @ 1 Ohm: 810 Watts x 1 Channel (14.4v)
- Max Power @ 1 Ohm: 1,200 Watts x 1 Channel (14.4v)
- MOSFET Power Supply
- Soft Turn on Circuit
- Frequency Response: 20Hz~250Hz
- Signal to Noise Ratio: 85 dB
- Damping Factor: 200<
- Low Pass Filter (Variable): 50Hz~220hz
- Subsonic Filter: Off~50Hz
- Remote Bass Knob & Wire Included
- 4 Gauge Power and Ground Terminals
- Working Voltage: 8.5V-14.4V
- Fuse Rating: 80 Amp
- Dimensions: 16" (Length) x 7" (Width) x 3" (Height)
Amp Kit Specifications
- Stinger Model: SSK4ANL
- 4 Gauge Complete Amplifier Installation Kit with ANL Style In-Line Fuse Holder
- Everything You Need to Install & Wire Up Your Amplifier
- Premium 4 Gauge CCA Power and Ground Wire for Optimal Power Transfer
- 17 ft. of 4 AWG Matte Blue Ultra Flexible Power Cable
- 3 ft. of 4 AWG Matte Brown Ultra Flexible Ground Cable
- 17 ft. of Blue Remote Turn-on Wire
- 17 ft Blue Twisted Pair Shielded RCA Interconnect Cable
- 20 ft. of Matte Blue Ultra Flexible Speaker Wire
- High Current ANL Style Fuse Holder
- 100 Amp ANL Fuse Included
- Ring Terminals
- Ground Terminals
- Vinyl Cable Ties Included
- Single 12-Inch Vented (Ported) Subwoofer Enclosure
- Custom Engineered Skar Audio Enclosure specifically Designed for use with the Skar Audio SDR-12 D2 Subwoofer
- "Wedge" Style Enclosure with Vented Design allows for Extreme Low End Bass Output Levels and Responsiveness
- Wood Thickness & Material: 5/8" MDF
- Front Baffle Thickness: 1.25"
- (Double Baffle - Countersunk Design for a Smooth, Flush, Subwoofer Appearance)
- Finish: Black Colored Carpet with Skar Audio logo in White on Top of Enclosure
- Premium Push Spring-Loaded Terminals
- Internal Air Space of Enclosure: 2.00 ft³
- Tuning Frequency of Enclosure: 34 Hz
- Box Outer Dimensions
- Width: 20.625"
- Depth #1: 15.75" (Top Depth)
- Depth #2: 18.00" (Bottom Depth)
- Height: 14.25"
The quality of the subs and amps are unreal for this price. Years ago I competed in SPL car stereo competitions and this equipment has not only grabbed my attention but brought back my desire to compete again.
Came in perfect condition, easy installation and sounds way better than I Imagined!!
I Definitely recommend you try these out.
I bought this for my daughter’s car and while it’s a little bit big in her trunk, this thing really put out the base! She loves it and I found it easy to install with the included kit. The only thing I did different was to use a press for the terminals that connect to the fuse block. This is the third pre packaged system we have purchased from Skar Audio. We highly recommend them.